Products

Stainless Steel

Plates, Sheets, Foils, Round bars and Flat bars

Stainless Steel that is also known as Inox steel is a steel alloy with a minimum of 10.5% of chromium content by mass. Stainless steel does not readily corrode, rust or stain with water as ordinary steel does.

There are different grades and surface finishes of stainless steel to suit the environment the alloy must endure. Stainless steel is used where both the properties of steel and corrosion resistance are required.

All stainless steel items i.e. Forms, Structural Stainless Steel, Bars, Sheets, Pipes, Tubes, Fittings, Flanges, Fasteners and Chains are available in all grades and all standard sizes.

Forms – Sheets, Plates, Coils, Strips

We have the stock of stainless steel in all forms such as sheets, Plates, Coils and Strips. The thicknesses are available from 0.1mm to 150mm, while the sizes are as per custom requirements. We have all finishes varying from 1D finish up to No.8 Finish. We can supply stainless steel forms of any origin with the right MTC and other appropriate certificates

Sheets/Plates/Coils/Strips
Thickness 0.1mm to 150mm
Finish No.1, No. 2D/2B/2BA, No.3, No.4(Brush),No.6, No.7, No.8(Mirror)
Origin European, Taiwanese & others on request
Grades EN, 304, 304H, 304L, 316, 316H, 316L, 309S,310,310S,316Ti, 347, 321, 321H
Size 1500mm Coils, 4 ft x 8ft (1.2m x 2.4m) , 2m x 6m, 1.5m x 6m, 2m x 12m
Structural – Beams, Channels, Angles

The structural forms of stainless steel are used primarily in building construction and civil engineering.

Structural Beams, Channels, Angles
Beams I Beams, T beams, C beams
Channels C Channels
Angles Equal Angles, Unequal Angles
Grades EN, 304, 304H, 304L, 316, 316H, 316L, 309S,310,310S,316Ti, 347, 321, 321H
Origin European, Taiwanese & others on request
Bars – Round, Flat, Square, Hexagonal

Steel bars have an incredibly wide range of uses and applications for many different industries. A wide variety of alloy composition types can comprise steel making it a very versatile material for use in producing alloy steel bars and stainless steel bars.

Round Bars, Flat Bars, Square Bars, Hexagonal Bars
Thickness 3mm to 200mm
Size 6 meter lengths
Grades EN, 304, 304H, 304L, 316, 316H, 316L, 309S,310,310S,316Ti, 347, 321, 321H
Origin European, Taiwanese & others on request
Pipes – Seamless, Welded, ERW, EFW

Steel Pipes are frequently used because it is durable and safe. Building materials underground may be susceptible to rotting and pests. Steel will not rot and is impervious to pests like termites. Steel also doesn’t need to be treated with preservatives, pesticides or glue, so it is safe to handle and work around. Since steel is non-combustible and makes it harder for fire to spread, it is good to use when building homes.

Seamless, Welded, EFW,ERW Pipes
Pipe Size 12mm to 650mm
Pipe Length 6 meter lengths
Pipe Schedule SCH 10,20,30,40,50,60,70,80,STD,XS,100,120,140,XXS
Finish 1D finish to No.8 Finish
Origin European, Taiwanese, Indian & others on request
Grades EN, 304, 304H, 304L, 316, 316H, 316L, 309S,310,310S,316Ti, 347, 321, 321H
Tubes – Square, Hexagonal, Rectangular

Steel tubes are used in structural applications would most likely be seam welded while pipes are normally a seamless steel product. Some steel tubes are also used in the transport of fluids, even though they are seam welded. These include steel tubes for water pipes and welded tubes are commonly used in the agricultural industry for manufacturing pivots.

Square, Hexagonal, Rectangular Tubes
Tube Size All standard sizes
Tube Length 6 meter lengths
Finish 1D finish to No.8 Finish
Origin European, Taiwanese, Indian & others on request
Grades EN, 304, 304H, 304L, 316, 316H, 316L, 309S,310,310S,316Ti, 347, 321, 321H
Fittings – Reducers, Elbows, Tees, Valves, Unions

A fitting is used in pipe systems to connect straight pipe or tubing sections, adapt to different sizes or shapes and for other purposes, such as regulating {or measuring) fluid flow.

Reducers, Elbows, Tees, Valves, Unions Fittings
Reducers Concentric, Eccentric
Elbows 90°, 45°, short radius, long radius
Finish 1D finish to No.8 Finish
Origin European, Taiwanese, Indian & others on request
Grades EN, 304, 304H, 304L, 316, 316H, 316L, 309S,310,310S,316Ti, 347, 321, 321H
Flanges – Weld Neck, Slip On, Socket Weld, Threaded, Lap Joint, Blind

Flange dimensions are determined by the pipe size and the pressure class required for the application. Flanges are standardized according publications from organizations like ASME, MSS, API and others.

Weld Neck, Slip On, Socket Weld, Threaded, Lap Joint, Blind
Nominal Pipe Size 6mm to 610mm
Diameter 25mm to 1125mm
Class 150,300,400,600,900,1500,2500
Origin European, Taiwanese, Indian & others on request
Grades EN, 304, 304H, 304L, 316, 316H, 316L, 309S,310,310S,316Ti, 347, 321, 321H
Fasteners- Bolts & Nuts, Washers, Nails, Rivets, Screws, Bands

A fastener is a hardware device that mechanically joins or affixes two or more objects together.

Bolts & Nuts, Washers, Nails, Rivets, Screws, Bands
Bolts & Nuts Hex Nuts & Bolts with washers , U-Bolts, Anchor Bolts, Stud Bolts, Hex Heavy bolts, Slim Nuts, Spring Nuts, Flange nuts
Washers Taper, Tooth Lock, Belleville, Square
Screws Wood, Roofing, Set
Origin European, Taiwanese, Indian & others on request
Grades EN, 304, 304H, 304L, 316, 316H, 316L, 309S,310,310S,316Ti, 347, 321, 321H
Chains- Anchor, Lifting, Twisting Link, Master Link, Safety

A chain is a series of connected links which are typically made of metal. A chain may consist of two or more links.

Anchor, Lifting, Twisting Link, Master Link, Safety Chains
Origin European, Taiwanese, Indian & others on request
Grades EN, 304, 304H, 304L, 316, 316H, 316L, 309S,310,310S,316Ti, 347, 321, 321H